|
Foam/Embossed
Increases sound absorption performance in the most critical frequency bands by 25 to 35%
when compared to other available foams. This increased effectiveness results from
the pattern surface which provides a larger and densified area available for absorption. |
|
Foam/Matte Film Finish
Provides a tough, puncture-resistant, non-glare textured surface which makes it suitable
for use in machine tool enclosures, air ducts, quiet rooms, vehicle interiors.
Textured surface in no way impairs the acoustic characteristics of the foam. |
|
Foam/Metalized Mylar
Developed for use around liquids and liquid spray equipment. Reflective, impervious,
wipe-clean surface protects against oils, water and many chemical substances.
Reduces heat transfer through engine compartments. |
|
Foam/Perforated Vinyl
Easy to die-cut and apply with pressure sensitive adhesive. The perforated vinyl
surface is well suited for use in motor vehicle cabs, providing a handsome
"finished" appearance. Vinyl surface in black, tan, grey or white. |
|
Foam/Barrier/Foam
Combines absorption with an effective noise barrier. The absorption efficiency of
the foam, together with the barrier, make this product ideal for lining engine, generator,
and compressor housings. |
|
Floormat
This surface is a tough, wear-resistant 1-lb. mass, plus a layer of closed cell foam
Isolator. Reduces noise that comes through engine bulkhead & floors of
off-highway equipment cabs. Can be washed repeatedly. |
|
Damping Sheet
A thin sheet of damping compound that comes with pressure-sensitive adhesive backing to
provide immediate and effective vibration damping when attached to steel as thick as 14
gauge or aluminum up to 1/4" thick. |
|
Foam Damping Sheet
Consists of a thickness of embossed foam bonded to a thin sheet of high-efficiency damping
compound. The damping sheet is effective over a wide frequency range. Provides
a single solution to damping and absorption problems, inside equipment enclosures. |
