Goulds Pump 3886
Impeller: Cast iron, semi open, non-clog with pump out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
Casing: Cast iron volute type for maximum efficiency. 2" NPT discharge, adaptable for A10-20 slide rail systems.
Mechanical Seal: SILICON CARBIDE VS. SILICON CARBIDE sealing faces, stainless steel metal parts, BUNA-N elastomers.
Shaft: Corrosion-resistant stainless steel. Threaded design. Locknut on three phase models to guard against component damage on accidental reverse rotation.
Motor: Fully submerged in high grade turbine oil for lubrication and efficient heat transfer.
Designed for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits, can be operated continuously without damage.
Bearings: Upper and lower heavy duty ball bearings construction.
Power Cable: Severe duty rated, oil and water resistant. Epoxy seal on motor and provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking.
0-ring: Assures positive sealing against contaminants and oil leakage.
Fasteners: All stainless steel
Sizing
| Order No. | Volts | Phase | Max.Amps | RPM | 3g Heater Size |
Wts.(lbs.) | Wt. |
| WS0511A | 1/2 | 115 | 1 |
13.0 | 1750 | N/A |
60 |
| WS0512A | 230 | 6.5 | |||||
| WS0518A | 200 | 7.5 | |||||
| WS0538A | 200 | 3 |
3.8 | K32 | |||
| WS0532A | 230 | 3.3 | K31 | ||||
| WS0534A | 460 | 1.6 | K21 |
