-
IMPELLERS are machined from cast iron to an exact profile and are permanently fastened to steel shafts. They are dynamically balanced to operate without vibration in any assembled position.
-
HEADPLATES, machined from cast iron, are ground on the interior surface to precise operating tolerances. Bearing fits are machined into headplates to assure exact bearing positioning.
-
IMPELLER CASES, machined from cast iron, are heavily ribbed to prevent distortion. Inlet and discharge ports are integral features of the cylinder.
-
ANTI-FRICTION BEARINGS are used exclusively. Smaller sizes are fitted with single-row ball bearings; larger sizes have double-row ball bearings and spherical roller bearings for overhung load capacity.
-
TIMING GEARS, cut from allow steel, are bolted to timing hubs. On smaller size units, gears are mounted directly on shafts.
-
LUBRICATION - Timing gears and gear-end bearings are splash oil lubricated from an oil-tight housing enclosing the timing gears. Drive-end bearings are grease lubricated through fittings. Lip type seals prevent oil and grease from entering the impeller chamber.
-
DRIVE SHAFT is extended for v-belt drive or direct connection. A thrust control is standard on all units. Vertical or horizontal shaft arrangement is available on all units.
-
FLEX-MOUNT DESIGN, unique to the Legend series, is adaptable to either vertical or horizontal installation for increased versatility. The feet are precisely machined to match the footprint of the popular California "Series F" blower and that of many competitive units. Hence, the performance and design features of SUTORBILT Legend rotary positive displacement blowers and vacuum pumps make them the quality choice as replacements for competitive units.
-
PERFORMANCE: Pressures up to 15 PSIG... Vacuum up to 16" HG...Flows to 32,863 CFM...
Horsepowers to 225 HP
-
PRODUCT LINE OFFERING: Sutorbilt Legend® - Gear Sizes 2-8"
